Arca Foot for Sony FE 200-600mm f/5.6-6.3 G OSS. Kirk Markins RRS Benro Acratech

Description

Fujifilm XF 100-400mm f/4.5-5.6 R LM OIS WR Lens
Sony FE 200-600mm f/5.6-6.3 G OSS Lens foot replacement
Please note that not all items shown on the pictures may be included in the   auction, and they are for presentation purposes only.  To determine   items for sale please see reference in the section "
Auction Includes
".
Description:
New Hejnar Photo Quick Release Arca Swiss type  foot replacement with QD ( Quick Detach ) socket for:
Sony FE 200-600mm f/5.6-6.3 G OSS Lens ( Lens not Included)
It is the best quick release system for tripods when combined with Arca style ball head and clamps. This foot is designed to work with various ARCA TYPE quick release clamps. This foot have enough room for your fingers under the lens to freely use lens focusing ring. Lens Foot  incorporate Quick Detach socket to attached a standard push-button QD mount. Use the QD socket to attached a standard push-button QD mount. QD system has been used for years by industries around the world including NASA, law enforcement and military agencies. The design inhibits accidental removal, especially when the camera is hanging from the strap. Attach your favorite strap to the clamp, then mount the clamp to any of Arca Type plates , L brackets or Foot Replacements. Straps are available at eBay, Amazon, Cabala's, Bass Pro and other stores with sporting fishing and military equipment. My favorite strap Black Rapid and  Magpul MS4® Dual QD Sling GEN2
Specification:
Length 5.50 inch.
1.30 inch height.
Weight 4.2 oz (119g)
1/4-20  taped holes.
Quick Detach Socket
Double-dovetail design allows for dual clamping surfaces on rail
Precision C.N.C. machined from 6061-T6 Aluminium
Compatible with Kirk, R.R.S., Arca-Swiss, and many other Arca-Swiss style Quick release clamps.
Stainless steel hardware.
Two safety stops. This prevents free fall when the clamp is not fully closed. (M3 screws)
Made in USA
Black hard coat anodized surface.
Auction Includes:
One  replacement foot with mounting screw
Hex key for all included  screws
Installation Instruction
1) Slide the SFR003 lens foot  onto the lens and attach it to a lens using the enclosed 1/4-20 screw.
2. Drive the screw in until you first meet resistance, then turn it about 30° farther to establish appropriate, but not excessive, torque. Do not over tighten.
3. Tighten the side set screw, then turn it about 30° farther to establish appropriate, but not excessive torque.